Technical Specification
Capacity
| In Cast Iron Drilling | 40 mm |
| In Cast Iron Face Mill | 100 mm |
| In Cast Iron End Mill | 25 mm |
| In Cast Iron Tapping | 22 mm |
| In mild Steel Drilling | 35 mm |
| Column Diameter | 130 mm |
| Swing | 610 Vmm |
| Working Surface | 435 x 200 mm |
| Longitudinal Travel Manual | 325 mm |
| Cross Travel | 250 mm |
| Vertical Travel | 400 mm |
| Quill Travel | 220 mm |
| Spindle Taper | MT - 4 |
| Range of Spindle Speed | 75 to 2070 RPM |
| No of Spindle Speed | 8 |
| Distance Spindle to Base | 940 mm |
| Base Size (Machine Area) | 490 x 470 mm |
| Overall Height with Guard | 1830 mm |
| Main Electrical Motor | 1.5 HP |
| V-Belt Section | B-62 |
| Shipping Case ( L x W x H ) | 1140 x 800 x 1950 mm |
Drilling
By Fixing square working table at the place of cross slide, Drilling function can be had. This facility is the first of its kind.
Standard Equipments
Motor Pully, Drift Key, Milling Collect Adapters.
Optional Equipments
Coolant Pump, Electrical Motor & R & F Switch, Square working table.
Silent Features
Propotioned column for rigidity of machine.
Rough & Smooth feed available by manual and power feed.
Provision of window for change of gear on top cover.
Quill spacer made of mild steel.
Main spindle made of EN Steel with 6 slots. 8 speed in either direction.
Grounded parts finished on imported grinding machine.
Major parts castings are of standard grade.
Head stock bored on imported boring machine.
Spindle sleeve is properly guided in honed drill head bore on 6 ball & roller bearings for Smooth & Accurate running.
