| +91-278-2445048 | +91-278-2445584

Technical Specification


In Cast Iron Drilling 40 mm
In Cast Iron Face Mill 100 mm
In Cast Iron End Mill 25 mm
In Cast Iron Tapping 22 mm
In mild Steel Drilling 35 mm
Column Diameter 114 mm
Swing 560 mm
Working Surface 725 x 224 mm
Longitudinal Travel Manual 340 mm
Cross Travel 305 mm
Vertical Travel 830 mm
Quill Travel 220 mm
Spindle Taper MT - 4
Range of Spindle Speed 90 to 1000 RPM
No of Spindle Speed 8
Range of Power Feed (2) 0.08 & 0.04
Distance Spindle to Base 830 mm
Overall Height with Guard 2130 mm
Main Electrical Motor 2 Speed : 1.75/2.5 HP
Shipping Case ( L x W x H ) 1170 x 915 x 2330 mm



By Fixing square working table at the place of cross slide, Drilling function can be had. This facility is the first of its kind.

Standard Equipments

Electrical Motor & Starter, Drift Key, Milling Collect Adapters.

Optional Equipments

Coolant Pump, Square working table, Fabrication base stand.

Silent Features

Propotioned column for rigidity of machine.

Rough & Smooth feed available by manual and power feed.

Provision of window for change of gear on top cover.

Quill spacer made of mild steel.

Main spindle made of EN Steel with 6 slots. 8 speed in either direction.

Grounded parts finished on imported grinding machine.

Major parts castings are of standard grade.

Head stock bored on imported boring machine.

Spindle sleeve is properly guided in honed drill head bore on 6 ball & roller bearings for Smooth & Accurate running.

Designed | Developed | Hosted By CANTECH

Scroll to Top