info@siddhapura.co.in | mitul@siddhapura.co.in +91-278-2445048 | +91-278-2445584

Technical Specification

Capacity

Capacity M.S C.I
Drilling Capacity 38 mm 38 mm
Drilling Head    
1. Spindle nose MT 4
2. Spindle Travel mm 220
3. No. of Spindle Speed   8
4. Range of Spindle Speed RPM 62-1980
5. Range of Power Feed mm / Rew (2) 0.08-0.04
Power H.P V-Belt
Main Motor 1.5 B-46
Arm Elevating Motor 0.5 A-23
Working Table    
L x W x H mm 380 x 300 x 300

 

Working Range    
1. Drilling Radius Max. / Min. mm. 895 / 440
2. Max. / Min. Distance Column to spindle mm 810 / 360
3. Maximum Drill Head Travel mm 450
4. Max. / Min. base plate to Spindle mm 930 / 230
5. Diameter of Column mm 165
6. Swivel of arm L / R side   90°
Base Plate    
L x W x H mm 750 x 1250 x 150
Working Surface mm 820 x 610
No. of T-Slots mm (4) 16
Overall Height mm. 2000
Wooden Case L x W x H mm 1250 x 1550 x 2000

Design Features

Main Spindle made from Alloys Steel with 6 slots is machined by hobber Machine and MT-BORE is provided internally grinded.

Provides8 speeds by accurate balanced pairs of cone pullys, which runs on two Ball Bearings.

Spindle Sleeve is properly grinded and hardened is guided in honned, Drill Head bore spindle is mounted on five ball & roller bearing for smooth and accurate running.

By simple adjustment of only Tapper Wedge facility to set Drill Head on arm guide way.

Top Cover Provided with window for changing gears and setting V-Belt for desired R.P.M.

Level facility for V-Belt Tension.

Gears made from best Quality material are Helical teethed on imported hobbing machine for smooth and noiseless running.

Piller & other parts being provided in machine are grounded and finished by WMW GERMAN MAKE GRINDING MACHINE.

Gradations are provided on protector for swivelling of Radial.

Arm to required degree.

Automatic adjustable depth control.

Auto as well as manual feeds.

Standard Equipments

1. Motor Pulleys2 Nos.

2. Drill Draft

3. Oil Can

Extra Equipments

1. Box table with T-Slots.

2. V-Belt.

3. coolant Pump & tank with fittings.

4. Electric Control Oannel.

5. Electric Motors.

Designed | Developed | Hosted By CANTECH

Scroll to Top